Black screen, no image or signal
Common causes: GPU failure, a damaged HDMI/DisplayPort port, dead VRAM, less often drivers. One of the most frequent symptoms.
We pinpoint whether it's the GPU core, the memory or the port — free, before the quote.
Checking…
4.8
· 370 reviews
Graphics Card Repair Warsaw
We repair Nvidia, AMD and Intel graphics cards — from a black screen and overheating to reballing, 12VHPWR power connector replacement and VRAM memory. Free diagnosis, a quote before any repair, 12-month warranty. Warsaw and all of Poland — 24h courier, plus mail-in from the whole EU.
Open now: 09:00-19:00
+48 512 800 030
Praga-Południe
Al. Stanów Zjednoczonych 72/13A
Nvidia
AMD
Intel
ASUS ROG
MSI
Gigabyte
Aorus
Zotac
Sapphire
XFX
PowerColor
Palit
Gainward
Inno3D
PNY
Can't see your card on the list? Call and ask — we'll check whether it can be repaired, including the latest RTX 50, Radeon RX 9000 and Intel Arc.
CSE Poland graphics card service in numbers — diagnosis, courier, warranty, Google rating
0
PLN
Diagnosis & quote
24
h
Courier pickup across Poland
12
Months warranty on repairs
4.8
Average Google rating (370 reviews)
Card not behaving as it should? Check the symptom
Most graphics card failures come down to a handful of typical causes. Below are the most common symptoms and what usually lies behind them. We don't guess — we confirm the cause with a free diagnosis before giving you a price.
Artifacts, stuttering image
Common causes: damaged VRAM (GDDR6/GDDR6X), an overheating core, an unstable power section, a bad vBIOS.
Usually fixed by VRAM memory replacement or power-section repair.
Overheating, throttling, loud fans
Common causes: dried-out thermal paste, worn thermal pads, a clogged heatsink, a fan that won't spin or a seized bearing.
Cooling service with PTM7950 — see what we cool on.
Coil whine or buzzing card
Common causes: coil vibration under load, sometimes a power-section or fan fault — rattles and odd noises.
We diagnose the source of the noise — coils, power section or cooling.
Code 43, card not detected
Common causes: a damaged GPU core, dead memory, a BIOS error, a damaged PCIe slot — the PC “can't see” the card.
Diagnostics and, if needed, reballing or VRAM replacement — see advanced repairs.
PC won't start, smoke, short circuit
Common causes: a short circuit in the power section, a melted 12VHPWR connector, damage after a power surge or liquid, “smoke from the card”.
Electronics repair and power connector replacement — even after failures others turn down.
Recognise the symptom? Book a free diagnosis — we'll check it and give you a price before any repair.
Graphics cards on our service bench
Nvidia, AMD and Intel — from RTX 20 to the 2026 launches
We repair Nvidia GeForce RTX series 50, 40, 30 and 20 (from RTX 2060 to RTX 5090), AMD Radeon RX series 9000, 7000, 6000 and 5000, and Intel Arc series B (B580/B570) and A — from all manufacturers: ASUS, MSI, Gigabyte, Zotac, Sapphire, XFX and more.
Nvidia GeForce RTX
RTX 50: 5090 · 5080 · 5070 Ti · 5070 · 5060 Ti · 5060 · 5050 — RTX 40: 4090 · 4080 Super · 4080 · 4070 Ti Super · 4070 Ti · 4070 Super · 4070 · 4060 Ti · 4060 — RTX 30: 3090 Ti · 3090 · 3080 Ti · 3080 · 3070 Ti · 3070 · 3060 Ti · 3060 · 3050 — RTX 20: 2080 Ti · 2080 Super · 2080 · 2070 Super · 2070 · 2060 Super · 2060
Core reballing, VRAM memory replacement, 12VHPWR power connector replacement, power-section repair, cooling service plus paste and PTM7950 replacement.
AMD Radeon RX
RX 9000: 9070 XT · 9070 · 9070 GRE · 9060 XT · 9060 — RX 7000: 7900 XTX · 7900 XT · 7800 XT · 7700 XT · 7600 — RX 6000: 6950 XT · 6900 XT · 6800 XT · 6800 · 6750 XT · 6700 XT · 6650 XT · 6600 — RX 5000: 5700 XT · 5700 · 5600 XT · 5500 XT
Repair after overheating and artifacts, GDDR6 memory replacement, VRM power-section repair, cooling service, thermal pad and paste replacement.
Intel Arc
B series (Battlemage): B580 · B570 — A series (Alchemist): A770 · A750 · A580 · A380 · A310
Diagnostics and repair of the electronics, power section, cooling and connectors on Intel Arc cards — including the latest Battlemage.
Manufacturers and OEM editions
ASUS ROG / TUF · MSI · Gigabyte / Aorus · Zotac · Sapphire · XFX · PowerColor · Palit · Gainward · Inno3D iChill · PNY · ASRock
We service cards from every manufacturer — from reference editions to top-end OC models with massive coolers.
We repair cards at component level
For a serious fault most shops say “it can't be done” and suggest a new card. We go down to the core, the memory and the power section — BGA reballing, 12VHPWR connector replacement and VRAM memory swaps are an everyday job for us.
GPU core reballing
Desoldering and re-seating the chip with fresh solder balls. A lifesaver for Code 43 and image loss caused by cold solder joints on the core.
BGA chip replacement
Replacing a damaged core or bridge chip on a BGA rework station with a controlled temperature profile — safely for the neighbouring components.
12VHPWR / 16-pin connector swap
Melted or loose 16-pin / 12V-2x6 power connector (the well-known RTX 4090 and 40/50-series fault). We fit a new one and check the power section.
VRAM replacement (GDDR6/GDDR6X)
Artifacts, Code 43 or no image from a damaged memory chip. We locate the faulty IC and replace it with a working one.
Power section (VRM) repair
Shorts, burnt-out MOSFETs and chokes, a “banana” (warped board). We rebuild the power section so the card holds voltages under load again.
Repair after liquid and short circuit
Cleaning, short-circuit tracing and trace rebuilding after a power surge, a spill or “smoke from the card”. We save what others write off.
Reballing and BGA replacement are also everyday work in our laptop service and computer repair. Not sure if your card can be saved? We'll check it for free.
Call: 512 800 030We cool cards on next-generation materials
Cheap paste that dries out after a year is a thing of the past. We match the thermal material to the specific core and memory — from phase-change materials, through thermal pads for the VRAM and power section, to liquid metal where it's safe. The result: lower core and memory temperatures, no more throttling or artifacts under load.
Honeywell PTM7950 / PTM7958
Phase-change — stable heat transfer with no dry-out or “pump-out”. It's not ordinary paste: we use it by default, keep it in stock and replace it on the spot — the best choice for powerful graphics cards.
Thermal Grizzly · Gelid · Fehonda · Fujipoly
We match thickness and hardness to the GDDR memory and the power section. Bad pads mean hot VRAM, throttling and artifacts.
Kryonaut · ARCTIC MX-6 · Noctua NT-H2
Proven and safe — the first choice where a phase-change material or liquid metal isn't advisable for a given design.
Liquid metal · Conductonaut
The lowest core temperatures where the design allows it. Applied with isolation of the surrounding components and core protection.
Honeywell PTM7950
PTM7958
VRAM pads
VRM thermal pads
KryoSheet
Liquid metal
GPU cooling service
Graphene and liquid metal conduct electricity — we use them only where they're safe for a given card. By default we use PTM7950 / PTM7958 (in stock, replaced on the spot); other pastes and thermal pads are ordered on request. We always match the material to the hardware, not the other way around.
4 steps from request to a working card
Full transparency at every stage. The diagnosis is free, and you learn the price before any repair — we only start once you approve it.
-
Request
Call or order a 24h courier and describe your card model and the symptoms. Bring it to Praga-Południe or send it from anywhere in Poland or the EU.
-
Free diagnosis
We check the card free of charge — the GPU core, VRAM memory, power section and cooling. The standard diagnosis takes up to 7 working days; if you're in a hurry, an express 24h diagnosis is available (paid extra — call to confirm current availability).
-
Quote before the repair
We give you a concrete repair cost — no hidden fees. You decide: accept the quote, or collect the card with no obligation.
-
Repair, test and warranty
We repair it, run a stress test (stability and temperatures), then send it back by courier or hand it over in person. Every repair comes with a 12-month warranty and a VAT invoice.
Graphics card service from anywhere in Poland
You don't have to live in Warsaw. Order a courier, we collect your card from your door, repair it and send it back. You can also drop it at an InPost parcel locker WAW47A. The diagnosis is always free and you learn the price before any repair.
-
1
Request online
Order a courier through the form in 2 minutes.
-
2
Courier collection
Door pickup by DPD courier (20 PLN one way), the next business day after confirmation.
-
3
Diagnosis & quote
We check the card for free and call you with a price — you decide.
-
4
Repair & return
We repair, test and send it back with a 12-month warranty.
- VAT invoice
- Insured shipment
- Quote before repair — you decide
- InPost parcel locker (WAW47A) or courier
Shipping from outside Poland? We accept parcels from the whole EU — no customs, details below.
Send your graphics card from anywhere in the EU
CSE Poland is a real repair lab in Warsaw — rated 4.8★ across 370 Google reviews under one address. We take in graphics cards from anywhere in the European Union: within the Union parcels clear no customs and carry no extra duties. You ship with the carrier you trust, the diagnosis is free, and you approve the price before any repair.
-
1
Contact us first
Describe the card model and the symptoms by e-mail (kontakt@csepoland.eu), phone or the contact form. We'll tell you honestly whether shipping makes sense for this fault — before you pay for transport. We reply in English — the same business day.
-
2
Pack the card safely
Anti-static bag, a rigid box and plenty of padding — the original GPU box works best. Add a note with your name, return address, e-mail and phone number.
-
3
Ship with any carrier
Any service that delivers to Poland works — pick one of the carriers below or your national post. Address: CSE Poland Sp. z o.o., Al. Stanów Zjednoczonych 72/13A, 04-036 Warsaw, Poland. If your carrier delivers to InPost parcel lockers, you can use locker WAW47A.
-
4
Diagnosis, quote and insured return
Free diagnosis, then a price by e-mail or phone — you decide. After the repair we return the card in a tracked, insured shipment with a 12-month warranty; the return shipping cost depends on your country and is quoted together with the estimate.
Inside the EU: no customs
Shipments between EU countries are free of customs clearance and duties — your card travels like a domestic parcel, there and back.
Outside the EU: check customs first
From the UK, Norway, Switzerland and other non-EU countries the parcel goes through customs clearance in both directions, with fees charged by the carrier or the customs office. Check the rates and procedure with your carrier before shipping and contact us first — clearance costs can change whether the repair pays off.
Payment & invoicing
- EU bank transfer
- Card on site
- Cash on site
- VAT invoice
We invoice in PLN and our IBAN is on the invoice. You can pay by transfer from any EU bank — in PLN, or in EUR if that is easier for you; we confirm the exact amount with you before you send it, so the exchange rate leaves no shortfall. Payment card and cash work at the Warsaw workshop. For mail-in orders you pay after the repair is completed and approved, and we ship the card back once the payment is credited. Every repair comes with a VAT invoice, and EU companies with a valid EU VAT number (including the country prefix) are invoiced under the reverse-charge mechanism.
Not sure if your card is worth shipping? Write to us at kontakt@csepoland.eu or call — a quick description of the fault is enough for an honest first assessment.
Call: +48 512 800 030
Why CSE Poland
Why bring your card to us
A graphics card repair isn't just a soldering iron — above all it's clear rules, a fair quote and the certainty that you'll get back a working, tested card with a warranty.
Free diagnosis
We check the card free of charge. The diagnosis costs nothing, and if you decline the repair — you pay nothing for the check itself.
Quote before the repair
We give the price after the diagnosis, before we do anything. You only pay if you accept the quote — no surprises at the end.
BGA & reballing equipment
A BGA rework station, soldering gear and real experience in component-level repairs — core reballing, VRAM memory and power-connector replacement.
Stress test before pickup
We test every repaired card under load — stability and temperatures — before it goes back to you. No “worked in the shop, died at home”.
Full transparency
We show you photos of what we found inside — damaged VRAM, a melted power connector, a short circuit. You know exactly what you're paying for.
12-month warranty
Every repair comes with a 12-month warranty on the replaced parts and the work done. We issue VAT invoices — for businesses too.
The best-rated repair shop in Warsaw's Praga-Południe district — we repair graphics cards in person and from anywhere in Poland. We issue VAT invoices: CSE Poland Sp. z o.o., VAT ID PL1133107861. The free diagnosis applies to private clients.
What our graphics card clients say
See all reviews on Google
Got a question about your card?
We answer.
We've gathered answers to the questions we hear most often from graphics card owners. Didn't find your answer?
Call: +48 512 800 030How much does a graphics card repair cost?
It depends on the fault, which is why the diagnosis and quote are free. A power connector swap is priced differently from core reballing or VRAM replacement. We give you the exact price before any repair — you only pay if you accept it. Call: +48 512 800 030.
Is the diagnosis paid, and how long does it take?
The standard diagnosis is free and usually takes up to 7 working days. If you're in a hurry, we offer an express 24-hour diagnosis for 250 PLN — call to confirm current availability. Either way, we always give you the repair price before we start.
Do you do reballing and BGA chip replacement?
Yes — we perform GPU core reballing and BGA chip replacement on a rework station with a controlled temperature profile. It's a frequent fix for Code 43 and image loss caused by cold solder joints.
Do you repair a melted 12VHPWR connector (RTX 4090/40-series)?
Yes. We replace a melted or damaged 12VHPWR / 16-pin / 12V-2x6 connector — a well-known fault on RTX 4090 and 40/50-series cards. We also check the power section so the problem doesn't come back.
Do you replace VRAM (GDDR6/GDDR6X)?
Yes. With artifacts, Code 43 or no image from a damaged memory chip we locate and replace the faulty VRAM IC (GDDR6/GDDR6X) with a working one.
Is it worth repairing a graphics card?
Usually yes — a repair typically costs a fraction of a new card. After the free diagnosis we'll tell you honestly whether it's worth it. If a repair isn't worth it, we'll advise against it rather than push you into costs (our reviews confirm this).
What paste and thermal pads do you use?
By default we use the phase-change material (PCM) Honeywell PTM7950 / PTM7958 — it's not ordinary paste (we keep it in stock and replace it on the spot) — plus thermal pads matched to the VRAM and power section. Premium pastes and liquid metal are ordered on request. More in the cooling section.
Do you provide a warranty on the repair?
Yes — every repair comes with a 12-month warranty on the replaced parts and the work done. We issue a VAT invoice, for businesses too.
The card whines or buzzes (coil whine) — can it be fixed?
We diagnose the source of the noise. Sometimes it's coil vibration under heavy load, sometimes a power-section or fan fault. After checking it we'll tell you whether and how it can be reduced.
How do I send a card from another city?
Order a DPD courier (20 PLN one way) — it will collect the card from your door the next business day. You can also drop it at an InPost parcel locker WAW47A. After the free diagnosis we call you with a quote, and after the repair we send it back with a warranty. Order a courier online.
How do I ship my graphics card from another EU country?
Contact us first with the card model and symptoms — we'll honestly tell you whether shipping makes sense. Then pack the card securely (anti-static bag, rigid box) and send it with any carrier that delivers to Poland: InPost, DPD, DHL, UPS, GLS or your national post. Within the EU there is no customs clearance and no duties. The diagnosis is free, you approve the price before any repair, and we return the card in a tracked, insured shipment.
Do you accept graphics cards from outside the EU?
Yes, but shipments from outside the EU (for example the UK, Norway or Switzerland) go through customs clearance in both directions, with fees charged by the carrier or the customs office. Check the rates and procedure with your carrier before shipping and contact us first — we'll help you assess whether the repair makes sense with clearance costs included.
How can I pay from another EU country?
By bank transfer from any EU bank — we invoice in PLN and our IBAN is on the invoice. You can send PLN, or EUR if that is easier for you; we confirm the exact amount with you before you pay, so the exchange rate leaves no shortfall. For mail-in orders you pay after the repair is completed and approved, and we ship the card back once the payment is credited. Every repair comes with a VAT invoice, and EU companies with a valid EU VAT number (including the country prefix) are invoiced under the reverse-charge mechanism.
Do you repair cards after liquid, a short circuit or “smoke”?
Yes. After diagnosing the power section we clean the board, trace the short circuit and rebuild the damaged traces or components. We often save cards that other shops have written off.
Do you service the latest RTX 50, Radeon RX 9000 and Intel Arc?
Yes — we repair cards from RTX series 20 up to the latest RTX 50, AMD Radeon RX from series 5000 up to RX 9000, and Intel Arc series A and B (Battlemage B580/B570). Can't see your model? Call us — we'll check.
Your card will pull its weight in games again —
start with a free diagnosis.
Call or order a courier. The diagnosis and quote are free, and every repair comes with a 12-month warranty. Drop by in Praga-Południe or send your card from anywhere in Poland — 24h courier.
Contact details
- Phone +48 512 800 030
- Email kontakt@csepoland.eu
-
Address
Aleja Stanów Zjednoczonych 72/13A
04-036 Warsaw, Praga-Południe -
Company details
CSE Poland Sp. z o.o.
KRS 0001056727 · VAT ID PL1133107861
Opening hours Checking…
- Monday – Friday 9:00 – 19:00
- Saturday 10:00 – 14:00
- Sunday Closed